¿Le pareció útil este contenido?
¿Cómo podríamos hacer que este artículo sea más útil?
Lyve Client can manage security for Lyve Mobile Arrays connected directly to the host PC or via the network using Lyve Mobile Rackmount Receiver.
| Lyve Mobile Array | Cable | Computer port |
| Host port (USB-C connector) | Thunderbolt™ 3 | Thunderbolt 3 / Thunderbolt 4 |
| Host port (USB-C connector) | USB-C to USB-C | USB 3.1 Gen 1 or higher |
| Host port (USB-C connector) | USB-C to USB-A | USB 3.0 or higher |
For more connection details, see the following:
| Lyve Mobile PCIe Adapter | Cable |
| Ethernet port (device configuration) | Ethernet |
| PCIe NVMe 12Gb x2 SFF-8644 (data) | SFF-8644 |
For more connection details, see the following:
| Lyve Mobile Rackmount Receiver | Cable |
| Ethernet port (device configuration) | Ethernet |
| FC 32Gb (data) | Fibre |
| FC 16Gb (data) | Fibre |
| iSCSI 25Gb (data) | Fibre (optical or copper) |
| iSCSI 10GbaseT (data) | Ethernet |
| SAS 12Gb (data) | SAS |
For more connection details, see the following:
Make sure your anti-virus, firewall or VPN security settings allow port access to Lyve Client.
| State | Access type | Port |
| Before device discovery | The application and device must be able to communicate via SLP. | UDP port 427 |
| After device discovery | The application and device must be able to communicate via SSH. | TCP port 22 |
In both states, it is assumed that the device has been assigned an IP address by a local DHCP server or has been assigned a static IP address.