SAVE AS PDF
Lyve Mobile Array User Manual
Lyve Mobile Array 

Was this content helpful?

OPEN MENU CLOSE MENU

Direct-Attached Storage (DAS) Connections

Connect power

Connect the included power supply in the following order:

  1. Connect the power supply to Lyve Mobile Array's power input.
  2. Connect the power cord to the power supply.
  3. Connect the power cord to a live power outlet.

 Use only the power supply provided with your device. Power supplies from other Seagate and third-party devices can damage Lyve Mobile Array.

Connect to host computer

Lyve Mobile Array is shipped with three types of cables to connect to host computers. Review the following table for  cable and host port options.

Cables Host port
Thunderbolt 3 Thunderbolt 3, Thunderbolt 4
USB-C to USB-C USB 3.1 Gen 1 or higher
USB-C to USB-A USB 3.0 or higher

Connect Lyve Mobile Array to a computer in the following order:

  1. Connect the Thunderbolt 3 cable to Lyve Mobile Array's Thunderbolt 3 host port located on the left side of the back panel.
  2. Connect the other end to an appropriate port on the host computer.

 

Windows Prompt: Approve Thunderbolt Device

When you first connect Lyve Mobile Array to a Windows PC that supports Thunderbolt 3, you may see a prompt requesting to authenticate the recently connected device. Follow the onscreen prompts to approve the Thunderbolt connection to Lyve Mobile Array. For more details on Thunderbolt connectivity to your Windows PC, see the following knowledge base article.
 If you are using a USB host and the Lyve Mobile Array status LED is illuminated with an amber chase pattern, make sure the cable is connected to Lyve Mobile Array's Thunderbolt 3/USB-C host port. The host port is the USB-C port with the computer icon. An amber chase pattern indicates that the computer is connected to the peripheral port.

Unlock the device

The LED on the device blinks white during the boot process and turns solid orange. The solid orange LED color indicates the device is ready to be unlocked.

Once the device has been unlocked by a valid Lyve Portal Identity or Lyve Token file, the LED on the device turns solid green. The device is unlocked and ready for use.

Power button

Power on—A direct connection to a computer is not required to power on Lyve Mobile Array. It automatically powers on when connected to a power outlet.

Power off—Before powering off Lyve Mobile Array, make certain to safely eject its volumes from the host computer. Apply a long press (3 seconds) to the power button to turn off Lyve Mobile Array.

If Lyve Mobile Array is off but still connected to power, you can turn Lyve Mobile Array back on by applying a short press (1 second) to the power button.

Cycle power when switching connection types

Switching from one DAS connection type (Thunderbolt, USB, or PCIe Adapter) to another can result in missing volumes. Windows users can also experience a blue screen error.

To avoid these issues, use the following procedure when changing connection types:

  1. Safely eject the volume.
  2. Power off Lyve Mobile Array.
  3. Change the connection as needed.
  4. Power on Lyve Mobile Array.

Lyve Mobile Array User Manual

Click here to access an up-to-date online versionof this document. You will also find the most recent content as well as expandable illustrations, easier navigation, and search capability.