Introduction
Parts
- FireCuda Special Edition SSD with heatsink
- Optional 5V addressable RGB connector cable to power and control RGB LED lights
System requirements
- M.2 (M key) slot, PCIe® Gen4×4 interface (compatible with PCIe Gen3 and Gen5 interfaces)
- Windows® 10 or higher
- For RGB LED functionality: Motherboard with 5V addressable header
Recommendations
- Intended for desktop PCs.
- FireCuda Special Edition SSD's heatsink is pre-installed and should not be removed as it can damage the SSD.
- With the heatsink, the product exceeds standard M.2 dimensions. Dimensions of the FireCuda Special Edition SSD are 75.00 mm (length) x 24.20 mm (width) x 20.35 mm (height with faceplate). Verify that your system provides enough space for installation.
- M.2 connectors H3.2 and above are recommended for an SSD with a heatsink.
- For optimal performance, provide sufficient airflow and cooling.
Before installation
IMPORTANT Make certain your computer's BIOS is up to date before installing FireCuda Special Edition SSD. See your computer or motherboard documentation for information on how to access the BIOS.
Most motherboards have more than one M.2 slot available for SSD drives. Before installing FireCuda Special Edition SSD:
- Determine the appropriate M.2 slot on your motherboard for FireCuda Special Edition SSD. If another SSD drive is already installed in the slot, you'll need to remove it during the installation.
- Decide whether you want to install your computer operating system on FireCuda Special Edition SSD and use it as your primary drive. See your computer or motherboard documentation for details on how to boot from an M.2 SSD.
- If you need to transfer files from another drive to FireCuda Special Edition SSD, consider how you will move your data or clone your drive before starting the installation.
Precautions
- Unpack the SSD.
- Inspect the SSD for any damages.
- For the safety of your SSD, please take the necessary precautions to avoid electrostatic discharge. Power down and power drain your computer according to the instructions provided in the computer product documentation.
- Back up the data from the existing storage device.
CAUTION Electrostatic discharge (ESD) can damage the SSD. Make sure that you install the SSD at an ESD-safe workstation. Ground yourself to protect the device from any static electricity present in your body.
Screwdriver and M.2 screws (not included) to fasten FireCuda Special Edition SSD.